Supported Model: DLink Eagle Pro AI AX3200 M32
Cybird is fully compatible with the DLink Eagle Pro AI AX3200 M32, bringing enhanced security and performance to your network. Whether you’re securing your home or a small business, the DLink Eagle Pro AI AX3200 R32 provides robust Wi-Fi coverage with Cybird’s advanced protection.

Router Image

Compatibility

• Firmware Required: OpenWrt 23.05 or above
• Hardware Specs:
  • CPU: Mediatek MT7622BV, 1350MHz
  • RAM: 512MB
  • Flash Storage: 128MB

Cybird Features on DLink Eagle Pro AI AX3200 R32

• All the security, privacy, parental controls, firewall, app priority features called out for Cybird unless mentioned here.

Setup Instructions

Step 1: Download the Cybird firmware for DLink Eagle Pro AI AX3200 M32

• Download Cybird Firmware for DLink Eagle Pro AI AX3200 M32

Step 2: Install OpenWrt firmware.

• Visit the OpenWrt Hardware Table for DLink Eagle Pro AI AX3200 M32
• Follow the OpenWrt installation guide for your router model.

Step 3: Create account on Cybird and Register your router

• Create Family/Business account on https://cybird.net

Step 4: Register your router with Cybird.

• Access the router admin panel via http://192.168.2.1
• Login using
  • Username: root
  • Password: admin
• Register using “Cybird > Router Registration” option.
  • Use your registered email address
  • Network PIN as shown in https://my.cybird.net/wifirouters/

Downloads:

• Cybird Firmware for DLink Eagle Pro AI AX3200 M32- Factory Firmware (First time setup on stock firmware)
• Cybird Firmware for DLink Eagle Pro AI AX3200 M32 – Sysupgrade (If you are upgrading from exising OpenWrt firmware)
• Cybird Firmware for DLink Eagle Pro AI AX3200 M32 – TFTP (If you are upgrading from exising OpenWrt firmware)
• Checksum file

Disclaimer

⚠️ Proceed with Caution

• Installing custom firmware like OpenWrt may void your router’s warranty.
• Installing the wrong firmware version can potentially damage or “brick” your router, rendering it unusable.